Connecting A Thinwire Cable To The T-Connector - Digital Equipment DECstation 5000 Model 200 Operator's Manual

Attach the connector on the ThinWire cable segment to the
4.
free end of the T-connector.
Firmly push the cable connector onto the T-connector. Twist
the cable connector on your left away from you or the cable
connector on your right toward you until the connector
slides forward and locks into place.
Contact your system manager, who will complete network
5.
installation for you. To complete the installation yourself,
follow the instructions in the networking guide for your
worksystem software.
Cable connector
Figure 6-4. Connecting a ThinWire cable to the T-connector
6–6 Optional Network Connections: ThinWire and ThickWire Ethernet
T-connector
Terminator
WSE2I031