Test Error Codes For 3D Graphics Accelerator Modules; Test Error Codes For Scsi Modules - Digital Equipment DECstation 5000 Model 200 Operator's Manual

Table 9-4. Test Error Codes for 3D Graphics Accelerator Modules
Error Code Action
fb The problem may be in the 3D graphics module.
fbfill
If the error message ends with the phrase vsimm=number, contact
vdacsig
your Digital service representative. If the error message does not end
with the phrase vsimm=number, replace the 3D graphics module.
intrdma The problem is in the 3D graphics module or the system module.
i860
If you have another 3D module that you know is good, try it in the
patrns
option slots. If the test no longer fails, replace the option module. If
sdmaddrs
the test continues to fail, replace the system module and chassis.
shade
stamp
If you have no other 3D module, contact your Digital service
stic-reg
representative.
vdacreg
Table 9-5. Test Error Codes for SCSI Modules
Error Code Action
cntl Replace the SCSI controller. The slot number in the error message is
sram the number of the slot in which the problem SCSI controller is located.
If the faulty SCSI controller is on the system module, replace the
system module and chassis. If the faulty SCSI controller is an option
module, replace the option module.
sdiag The problem is in the SCSI controller or a drive connected to the SCSI
controller. Contact your Digital service representative.
Troubleshooting 9–11