RS-485 data logging
If ACP BACnet RS-485 data logging is necessary, it must be carried out by the specialized service
technician.
Data logging can be done with SD card.
Proceed in the following order.
1.
Insert SD card into the ACP BACnet. (Refer to data backup)
2.
Press [SET] button of the ACP BACnet.
Select [Function] menu, and press [SET] button.
3.
4.
Select [Data Logging] menu, and press [SET] button again.
Select whether to set data logging.
5.
PQNFB17C0
Network Info
Contents
>
Function
Register FD
Click
[SET]
button
S/W update
DB back up
>
DB recover
Click
down (▼)
button
>
Data Logging
Click
[SET]
button
[Set Data Logging]
Not(0) / USE(1) : 0
INSTALLING ACP BACnet
[Function 1/2 ]
[Function 2/2 ]
41