LG BECON HVAC BACnet PQNFB17C1 Installation & User Manual page 37

Checking ACP BACnet access
It checks whether the ACP BACnet network address setting is properly done.
You can check the possibility of accessing the ACP BACnet through PING test.
1. You can open the following DOS window through Windows "Start", "Run", "cmd" input.
2. In DOS screen, input "ping <ACP BACnet IP address>" as follows to run PING test.
When the network setting is properly done
When the network setting is not properly done
INSTALLING ACP BACnet
27