Set Ip Address - LG BECON HVAC BACnet PQNFB17C1 Installation & User Manual

24
INSTALLING ACP BACnet
The network address consists of four 3-digit numbers. In case of setting the network address, the,
name of the related address is displayed on the LCD of the ACP BACnet, and press Up/Down/Left/
Right (▲, ▼, ◄, ►) button to set.
Press Up/Down (▲, ▼) button to increase/decrease the number of the digit where the cursor is on,
and press Left/Right (◄, ►) button to move the digit of the network address to the left or right.
Example of pressing down (▼) button
Example of pressing right (►) button
Caution
Setting the network address
The network address can be separated to 4 digits based on ., and each number shall be 255
y
or less.
Number exceeding 255 may not be input.
y
Notes
Assigning the network address
Network address shall be assigned by the person in charge of the network of the
y
corresponding site. (IP address, Gateway address, Net mask)
ACP BACnet can use both fixed IP type and dynamic IP type, but fixed IP type is
y
recommended, and if dynamic IP type is used, it may cause inconvenience of the customer.
Please refer to "Using dynamic IP using DHCP" for details.
y
If fixed IP type is used, network address (IP address, Gateway address, and Net mask) shall
y
be assigned by the person in charge of the network of the corresponding site.
PQNFB17C0
PQNFB17C0

[Set IP Address]

192.168.000.000
Click
down (▼)
button
[Set IP Address]
192.167.000.000
[Set IP Address]
192.168.000.000
Click
right (►)
button
[Set IP Address]
192.168.000.000