Caution
[Function] menu is used by the system air conditioner service technician, so user shallnever
y
use this function.
If this function is incorrectly used, it may cause disorder of the ACP BACnet.
y
How to set network address
In [Network Info] menu, use the category to set using "up" and "down" (▲, ▼) buttons.
IP, Gateway, and Net mask settings are displayed in the initial screen of [Network Info] menu, and
you can check MAC address and DHCP setting using "down" (▼) button.
[Network Info]
IP
000.000.000.000
GW
000.000.000.000
MS
>
000.000.000.000
To change the network setting, locate the arrow on the corresponding setting position, and press
[SET] button to enter the corresponding setting screen.
[Network Info]
IP
000.000.000.000
>
GW
000.000.000.000
MS
000.000.000.000
DOWN
[Network Info]
> MC 000000:00:00:00
DHCP NO
UP
[SET]
[Set IP Address]
000.000.000.000
[
]
INSTALLING ACP BACnet
23