LG BECON HVAC BACnet PQNFB17C1 Installation & User Manual page 25

Installing the ACP BACnet in DIN RAIL
ACP BACnet can be installed in DIN RAIL with width 35 mm and height 7.5 mm.
Proceed as the follows to install the ACP BACnet in an adequate place.
The installation method of the ACP BACnet is explained here with the example of installing the ACP
BACnet in DIN RAIL.
• Decide the space to install the ACP BACnet.
• Before installing the ACP BACnet, check if it is the adequate place to connect the ACP
BACnet with the power, RS-485, and LAN cable.
• Install DIN RAIL.
• Hook the top part of the ACP BACnet on DIN RAIL.
• Push the main body of the ACP BACnet until you hear the sound of installation.
• Pull the ACP BACnet to check if it is fixed.
Caution
After installing to DIN RAIL, do not fix to the wall using screws.
y
ACP BACnet may be damaged.
y
DIN Rail fixing Screw Spec: M3, screw head height 2.0 ~ 1.75 mm, screw head diameter
y
7.0 ~ 5.5 mm
INSTALLING ACP BACnet
① Hooking on DIN RAIL
② Fixing to DIN RAIL
15