LG BECON HVAC BACnet PQNFB17C1 Installation & User Manual page 6

iv
IMPORTANT SAFETY INSTRUCTIONS
y Do not install the product at wet place.
- It may cause failure of the product.
y Provided product and adaptor shall only be installed and used inside a building.
- It may cause fire or failure of the product.
*Do not install or use outside.
y Install stably in a place that can endure the weight of the ACP BACnet.
- If the installation place is not strong enough, the ACP BACnet may fall and damaged.
y Make sure to enquire to the specialty store of the product purchase or service center for
electric works.
- It may cause fire or electric shock.
y Do not damage the power cord or bend it by force.
- It may cause fire or electric shock.
y You need to use a safely insulated power supply which follows IEC61558-2-6 and NEC
Class2
- If you do not follow, It may cause fire, electric shock, explosion or injury.
y Do not connetion 220V power to 24V products
- If you do not follow, It may cause fire, electric shock, explosion or injury.
y Do not connect power cord to the control signal connector.
- It may cause fire or explosion.
Operation
y Do not change or extend the power cord with your own discretion.
- It may cause fire or electric shock
y Do not place any heating device near the product.
- It may cause fire.
y Do not use any heating device near the power cord.
- It may cause fire or electric shock.
y Do not let water flow into the product.
- It may cause electric shock or failure.
y Do not put heavy weight on the power cord.
- It may cause fire or electric shock.
y Do not put heavy weight on the product.
- It may cause the failure of the product.
y If the product is flooded, consult the service center or the professional installation agency.
- It may cause fire or electric shock.