Advanced Screen - ZyXEL Communications NBG6503 User Manual

Table 48 Network > DHCP Server > General (continued)
LABEL
Pool Size
Apply
Reset

13.4 Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
NBG sends to the DHCP clients.
To change your NBG's static DHCP settings, click Network > DHCP Server > Advanced. The
following screen displays.
Figure 83 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Table 49 Network > DHCP Server > Advanced
LABEL
LAN Static DHCP Table
#
MAC Address
Chapter 13 DHCP Server
DESCRIPTION
This field specifies the size, or count of the IP address pool for LAN.
Click Apply to save your changes back to the NBG.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
NBG6503 User's Guide
110