ZyXEL Communications NBG6503 User Manual page 66

Table 28 Status Screen: Access Point Mode (continued)
LABEL
- SSID
- Channel
- Security
WLAN 5G Information
- MAC Address
- SSID
- Channel
- Security
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Configuration Mode
Interface Status
Interface
Status
Rate
Summary
Packet Statistics
WLAN Station Status
8.4.0.1 Navigation Panel
Use the menu in the navigation panel to configure NBG features in Access Point mode.
Chapter 8 Access Point Mode
DESCRIPTION
This shows a descriptive name used to identify the NBG in the wireless 2.4G LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the NBG is using.
This shows the wireless adapter MAC Address of your device.
This shows a descriptive name used to identify the NBG in the wireless 5G LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the NBG is using.
This column shows the type of data the NBG is recording.
This column shows the actual data recorded by the NBG.
This is the total time the NBG has been on.
This field displays your NBG's present date and time.
This displays what percentage of the NBG's processing ability is currently used. When this
percentage is close to 100%, the NBG is running at full load, and the throughput is not going
to improve anymore. If you want some applications to have more throughput, you should
turn off other applications (for example, using bandwidth management.
This shows what percentage of the heap memory the NBG is using.
This shows the web configurator mode you are viewing - Expert.
This displays the NBG port types. The port types are: LAN, WLAN 2.4G, and WLAN 5G.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping
a call) if you're using PPPoE or PPTP encapsulation. This field displays N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN 2.4G / 5G Station Status screen
4.8 on page 41). Use this screen to view the wireless stations that are currently associated
to the NBG.
NBG6503 User's Guide
66
(Section 4.6 on page 40).
(Section