ZyXEL Communications NBG6503 User Manual page 156

back up your configuration file before making configuration changes. The backup configuration file
will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your NBG.
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 118 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 69 Maintenance > Backup/Restore
LABEL DESCRIPTION
Backup Click Backup to save the NBG's current configuration to your computer.
File Path Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Note: Do not turn off the NBG while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one minute
before logging into the NBG again. The NBG automatically restarts in this time causing a
temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Reset Pressing the Reset button in this section clears all user-entered configuration information
and returns the NBG to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
NBG. Refer to the chapter about introducing the Web Configurator for more information on
the RESET button.
Chapter 22 Maintenance
NBG6503 User's Guide
156