What You Need To Know; General Firewall Screen - ZyXEL Communications NBG6503 User Manual

Simultaneous dual-band wireless ac750 home router
Hide thumbs Also See for NBG6503:
Table of Contents

Advertisement

17.3 What You Need To Know

The NBG's firewall feature physically separates the LAN and the WAN and acts as a secure gateway
for all data passing between the networks.
It is designed to protect against Denial of Service (DoS) attacks when activated (click the General
tab under Firewall and then click the Enable Firewall check box). The NBG's purpose is to allow a
private Local Area Network (LAN) to be securely connected to the Internet. The NBG can be used to
prevent theft, destruction and modification of data, as well as log events, which may be important
to the security of your network.
The NBG is installed between the LAN and a broadband modem connecting to the Internet. This
allows it to act as a secure gateway for all data passing between the Internet and the LAN.
The NBG has one Ethernet WAN port and four Ethernet LAN ports, which are used to physically
separate the network into two areas.The WAN (Wide Area Network) port attaches to the broadband
(cable or DSL) modem to the Internet.
The LAN (Local Area Network) port attaches to a network of computers, which needs security from
the outside world. These computers will have access to Internet services such as e-mail, FTP and
the World Wide Web. However, "inbound access" is not allowed (by default) unless the remote host
is authorized to use a specific service.

17.4 General Firewall Screen

Use this screen to enable or disable the NBG's firewall, and set up firewall logs. Click Security >
Firewall to open the General screen.
Figure 93 Security > Firewall > General
The following table describes the labels in this screen.
Table 55 Security > Firewall > General
LABEL
Enable Firewall
Apply
Reset
Chapter 17 Firewall
DESCRIPTION
Select this check box to activate the firewall. The NBG performs access control and protects
against Denial of Service (DoS) attacks when the firewall is activated.
Click Apply to save the settings.
Click Reset to start configuring this screen again.
NBG6503 User's Guide
126

Advertisement

Table of Contents
loading

Table of Contents