BenQ ES500 User Manual page 14

11. Power
I
I
Toggles the projector between
standby mode and on. See
the projector" on page 21
"Shutting down the projector" on page
42 for details.
12. Keystone/Arrow keys (
/ Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 24
details.
13. Auto
Automatically determines the best
picture timings for the displayed
image. See "Auto-adjusting the image"
on page 23 for details.
14. Source
Displays the source selection bar. See
"Switching input signal" on page 29
details.
15. Volume +/-
No function for this model.
Infra-Red (IR) remote control sensor is located on the front of the projector. The
remote control must be held at an angle within 30 degrees perpendicular to the
projector's IR remote control sensor to function correctly. The distance between the
remote control and the sensor should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor
on the projector that might obstruct the infra-red beam.
14 Introduction
"Starting up
and
/ Up,
for
for
• Operating the projector from the front
16. Page Up/Down
Page up/down arrows when connected
through USB to a PC. See
paging operations" on page 37
details.
17. Mute
No function for this model.
18. Freeze
Freezes the projected image. See
"Freezing the image" on page 38
details.
19. CC
Display the video term description on
screen which is provided for hard-of-
hearing viewers.
20. Quick Install
A menu shortcut that includes Test
Pattern, Projector Installation and
Keystone.
21. Teaching Template
Displays the selectable bar for teachers
choosing the template as his/her suitable
teaching background. See
Template" on page 40
22. 3D Settings
Activates the 3D On-Screen Display
(OSD) menu item.
"Remote
for
for
"Use Teaching
for details.