Intended use 9. Use appropriate tool The intended use is described in this instruction manual. Your Black & Decker strimmer has been designed for Do not force small tools or attachments to do the job of a trimming and ﬁnishing lawn edges and to cut grass in heavy-duty tool.
Do not store in locations where the temperature may exceed 40 °C. Do not expose the tool to rain or high humidity. Charge only at ambient temperatures between 10 °C and Never allow children or any person unfamiliar with these 40 °C.
Warning! If the cutting line protrudes beyond the trimming 4. Secondary handle 5. Handle knob blade (11), cut it off so that it just reaches the blade. 6. Handle adjustment collar Winding new line onto an empty spool (ﬁg. E - G) 7.
Edging mode (ﬁg. L & M) After approx. 1 hour of charging, the red charging indicator will stop lighting and the green end of charge indicator will light up. For edging, the trimmer head should be in the position shown The battery is now fully charged.
Regularly clean the cutting line and spool using a soft Remove the spool and unwind the cutting line, then wind it brush or dry cloth. on neatly again as described above. Replace the spool as Regularly use a blunt scraper to remove grass and dirt instructed.