Intended use 9. Use appropriate tool The intended use is described in this instruction manual. Your Black & Decker strimmer has been designed for trimming Do not force small tools or attachments to do the job of a and finishing lawn edges and to cut grass in confined spaces. heavy-duty tool.
360˚ Keep people and animals at least 6 m away from the Charge only at ambient temperatures between 4 °C and cutting area. 40 °C. Charge only using the charger provided with the tool. When disposing of batteries, follow the instructions given Do not expose the tool to rain or high humidity.
8. Motor housing Warning! If the cutting line protrudes beyond the trimming 9. Guard blade (11), cut it off so that it just reaches the blade. 10. Line trimming blade 11. Edge guide Winding new line onto an empty spool (fig. E - G) 12.
1 hour charger Push the collar in the direction of the trimmer head and Check if the red charging indicator (16) lights up. If the rotate it counterclockwise until the trimmer head engages green end of charge indicator (17) lights up now instead, in the trimming position (fig.
After use disconnect the battery and check the tool for If the automatic line feed still does not work, try the following any damage. suggestions: Regularly clean the ventilation slots in your tool and Carefully clean the spool housing. charger using a soft brush or dry cloth. Remove the spool and check if the lever can move freely.
24 Technical data months from the date of purchase, Black & Decker guarantees GLC2500 GLC3000 to replace defective parts, repair products subjected to fair Voltage wear and tear or replace such products to ensure minimum...