Table of Contents
Advertisement
Record On a Tape
Important:
If a remote control button does not work
when pressed, press the VCR button on
the remote and try the button again.
Ready Check List
Q
All connections are made (pg. 8, 17).
□ TV and VCR are plugged in.
O TV is on and tuned to CH3, 4, or VIDEO.
□ Remote is in VCR mode. (Press VCR)
I
Insert tape
with
rec. tab
(pg. 4).
® • VCR power comes on.
"VCR" lights on Multi Function Display.
O Press CH AT, or number keys
™ to select channel.
• For "LINE" input, see pg. 24.
• For channels over 100, press 100 key then
press the remaining 2 digits.
3
Press SPEED
to select record speed (pg. 4).
SP
= Standard Play
LP
= Long Play
SLP
= Super Long Play
• Speedappearson-screenandonMulti Function Display.
4
Press REC
to start record.
• To edit out unwanted scenes, press PAUSE/
SLOW to pause, and again to resume recording,
5
Press STOP
to stop record.
Record using VCR controls
2
Select
1
Insert
4
Press REC
to start
Recording.
Channel,
a cassette.
VCR/TV
Multi Function
Display
5
Press STOP/
EJECT to stop.
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the EH3 mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
M One Touch Recording
(record in progress),
• VCR shuts off after preset record length.
—> each press of REC adds 30 min. to
record length up to 4 hours.
| Record one station, watch another,
--> press VCR/TV ("VCR" goes out on Multi
Function Display),
--> select channels at TV (recording
continues).
• Watching one channel and
recording another is NOT
possible when using a Cable
Box or a Satellite Receiver.
| Select channels at VCR,
•
Other channels cannot be viewed during
recording.
—> press VCR/TV ("VCR" lights on Multi
Function Display),
--> select channels at VCR.
• After 5 min. in Pause mode, VCR stops to
protect tape and video head.
13
Advertisement
Table of Contents
