Master Section - ALLEN & HEATH Xone:43C User Manual

1
2
3
Allen & Heath

MASTER SECTION

1 Mix / Monitor Meters
The main meters follow the selected monitor source.
The default display is the mix level, pre-master level,
which is overridden with an input channel level if the
channel cue switch is selected.
In split cue mode, the left (L) mix meter will display the
cued channel signal level and the right (R) mix meter will
display the mix level. The cued mix audio is pre level to
prevent mismatch due to the position of the master lev-
el control.
The mixer should be operated with these meters aver-
aging around '0' with loudest peaks no higher than '+6'.
2 Master Level Control
A rotary master control adjusts the level of the master
mix XLR outputs feeding the house sound system. This
does not affect the booth output or the meter reading.
3
Booth Level Control
Adjusts the level of the signal to the stereo booth RCA
output. This does not affect the headphones.
booth output could be used for a booth monitor, re-
cording or an additional zone feed.
11
The
XONE:43C User Guide