Table of Contents
Advertisement
2-3
Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
•
Phillips Screwdriver
•
Pan head screws (15 pieces)
•
Standoffs (15 pieces, if needed)
Location of Mounting Holes
There are fifteen (15) mounting holes on this motherboard indicated by the arrows.
JF1
Caution: 1) To avoid damaging the motherboard and its components,
please do not use a force greater than 8 lb/inch on each mounting screw
during motherboard installation. 2) Some components are very close to
the mounting holes. Please take precautionary measures to prevent dam-
age to these components when installing the motherboard to the chassis.
COM1
VGA
SXB1_1
SXB1A
BMC_HB_LED1
BMC
JVRM1
C612
JPME2
JBT1
JBAT1
JGPW2
1
JUSBA1
JGPW3
JTPM1
CPU2
CLOSE 1st
OPEN 1st
FAN6
FAN5
FAN7
JIPMB1
IPMI_LAN
JA1
SP1
X10DRU-X
REV:1.01
DESIGNED IN USA
IPMI CODE
PSU2
JGPW1
BAR CODE
BIOS LICENSE
CPU1
CLOSE 1st
OPEN 1st
FAN4
FAN3
2-5
Chapter 2: Installation
GPU PWR1 BP PWR2
PSU1
BP PWR1
JPW21
JPW23
JPW22
I-SGPIO2
JGPW4
FAN2
FAN1
Advertisement
Table of Contents
