Security Settings - Supermicro SUPERO X10DRU-X User Manual

X10DRU-X/X10DRU-LL Motherboard User's Manual
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).
When you have completed the system configuration changes, select this option to
save the changes and reboot the computer so that the new system configuration
settings can take effect. Select Save Changes and Exit, and press <Enter>. When
the dialog box appears, asking you if you want to exit the BIOS setup without sav-
ing, click Yes to quit BIOS without saving the changes, or click No to quit the BIOS
and save changes.
4-6

Security Settings

This menu allows the user to configure the following security settings for the
system.
Password Check
Select Setup for the system to prompt for a password at Setup. Select Always for
the system to prompt for a password at bootup and upon entering the BIOS Setup
utility. The options are Setup and Always.
Administrator Password
Use this feature to set the administrator password which is required before entering
the BIOS setup utility. The length of the password should be from 3 characters
to 20 characters long.
4-36