Boot Features; Power Configuration - Supermicro SUPERO X10DRU-X User Manual

Chapter 4: AMI BIOS
Boot Features
Quiet Boot
This feature selects the bootup screen display between POST messages and
the OEM logo. Select Disabled to display the POST messages. Select Enabled
to display the OEM logo instead of the normal POST messages. The options are
Enabled and Disabled.
AddOn ROM Display Mode
This item sets the display mode for the Option ROM. Select Keep Current to use the
current AddOn ROM Display setting. Select Force BIOS to use the Option ROM dis-
play mode set by the system BIOS. The options are Force BIOS and Keep Current.
Bootup Num-Lock
This feature sets the Power-on state for the Numlock key. The options are Off
and On.
Wait For 'F1' If Error
Select Enabled to force the system to wait until the 'F1' key is pressed if an error
occurs. The options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt
19 at bootup and allow the drives that are attached to these host adaptors to func-
tion as bootable disks. If this item is set to Disabled, the ROM BIOS of the host
adaptors will not capture Interrupt 19, and the drives attached to these adaptors
will not function as bootable devices. The options are Immediate and Postponed.
Retry Boot
Select Enabled to force the system to reboot when system fails to boot. The op-
tions are Disabled and Enabled.

Power Configuration

Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
4-5