Supermicro SUPERO X10DRU-X User Manual page 16

X10DRU-X/X10DRU-XLL Motherboard User's Manual
Peripheral
Devices
BIOS
Power
System
Health
Monitoring
Serial (COM) Port
•
One (1) Fast UART 16550 Connection: 9-pin RS232
port
VGA
•
Rear VGA Port
USB Devices
•
Two (2) USB 3.0 on rear
•
Two (2) USB 3.0 for front panel
•
One (1) USB 3.0 Type A
•
128 Mb AMI SPI BIOS Flash ROM
•
APM 1.2, DMI 2.3, PCI 2.3, ACPI 1.0/2.0/3.0,
USB Keyboard, Plug & Play (PnP), UEFI 2.3, and
SMBIOS 2.7 or later.
•
ACPI Power Management
•
Power-on mode for AC power recovery
•
Intel ® Intelligent Power Node Manager (available
when the NMView utility is installed)
•
Management Engine
•
Riser Card auto-detection
System Health Monitoring
•
+3.3V, +5V, +/-12V, +3.3V Stdby, +5V Stdby, VBAT,
and memory.
•
CPU 5-Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Fan status monitoring with firmware 4-pin fan speed
control
•
Low noise fan speed control
LED Indicators
•
BMC (BaseBoard Management) LED
•
InfiniBand LED
•
UID/Remote UID LED
1-8