Canon PIXMA MP970 series Quick Start Manual page 154

Windows® Software Installation
- - - - - = 1 , /
-+
To Computer
o
When the list of applications to install appears, confirm the
contents and click Install.
rnNote
Move the cursor over items to display explanations of each application.
o
Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
o
When the Setup Method screen appears, select Use the
printer via USB, then click Next.
®
When the Printer Connection screen appears, connect
one end of the USB cable to the computer, the other to the
machine, then TURN THE MACHINE ON. The software will
begin identifying the printer port being used.
~
Important
If you cannot go to the next procedure after three minutes, refer to "Cannot
Install the MP Drivers" in the Quick Start Guide.
rn Note
• The screens below refer to Windows Vista
™
operating system Ultimate Edition
(hereafter referred to as "Windows Vista") installation.
Screens may vary depending on the operating system you are using.
• Log into a user account with the administrator privilege.
• Before installing the software, disable all anti-virus programs and automatically
loading programs.
• A message asking for your confirmation to restart your computer may appear
during the installation process. If this message is displayed, follow the on-screen
instructions and click OK.
The installation resumes from where it left off when your computer has been
restarted.
• If the computer is restarted during installation, do not remove the Setup CD-ROM
during restarting.
o
Be sure to TURN THE MACHINE OFF before continuing.
(1) Press the ON/OFF button.
(2) Make sure that the Power lamp stops flashing.
o
Turn the computer on and start Windows.
~Important
If the Found New Hardware or Found New Hardware Wizard screen appears
automatically, remove the USB cable connected to your computer. Click Cancel
to quit the screen. In Windows Vista, the screen may close automatically when
the USB cable is unplugged. Then turn off the machine and proceed from step
{) to install the software.
€)
Insert the Setup CD-ROM. The setup program should run
automatically.
In Windows Vista, go to Step
O.
In Windows XP and Windows 2000, go to
Step
0.
o
If the AutoPlay screen appears, click Run Msetup4.exe.
When using Windows 2000:
When you connect the machine to the computer with a USB cable, a
message asking for your confirmation to restart your computer is displayed.
Click Yes. Then when an error message is displayed, click OK to proceed
with the installation.
m
When the Setup Complete screen appears, click Next.
XtAutQP1aydd·lf1lf,m(nOl·g,p,od
~ AIw.~
do 1tm for $ohware and games
~I
@
When the User Registration screen appears, click Next.
rn Note
To register later, click Cancel and go to Step
®.
After software installation is complete,
double-click on the desktop.
II
Aut....,
,. CD-R Drive (E:) CANON_U
01f the User Account Control screen appears, click Continue.
If the same screen reappears in subsequent steps, click
Continue.
o
When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
rn Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed with the installation.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
0
on the front page.
@
When the PIXMA Extended Survey Program screen
appears, confirm the message. We would appreciate it if you
would take part in this program regarding the use of Canon
printers. If you can agree, click Agree.
ill
When the Installation completed successfully screen
appears, click Exit.
After clicking Exit, remove the CD-ROM.
If Restart is displayed, make sure that the Restart the system now
(recommended) check box is selected, then click Restart.
Remove the CD-ROM after clicking Restart and restarting the computer.
rn Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
Software installation is now complete.
Part no. QT5-1178-V01 © 2007 Canon Inc. "Microsoft" is a registered trademark of Microsoft Corporation. "Windows" is a trademark of Microsoft Corporation, registered in the U.S. and other countries. "V