Canon PIXMA MP970 series Quick Start Manual page 131

11
The Installation completed successfully
screen appears.
When using Windows Vista:
To use the Card Slot over network, mount the Card
Slot using the Canon IJ Network Tool after software
installation is complete. For details, refer to "Using
the Card Slot over a Network" in the User's Guide
on-screen manual.
If only one CD-ROM is included in the package
for the Windows setup
Click Exit.
After clicking Exit, remove the CD-ROM.
IE
Note
• If Restart is displayed, make sure that the Restart
the system now (recommended) check box is
selected, then click Restart.
Remove the CD-ROM after clicking Restart and
restarting the computer.
• Keep the CD-ROM in a safe place in case you need
to reinstall the software.
If two CD-ROMs are included in the package for
the Windows setup
When the Continue to Windows (CD-2) screen
appears, perform the following steps (1) to (3) to
complete the installation.
(1) Click Exit.
IE
Note
If Restart is displayed, make sure that the
Restart the system now (recommended) check
box is selected, then click Restart.
(2) Remove the Setup CD-ROM "Windows (CD-1)"
and insert the Setup CD-ROM "Windows (CD-2)
Macintosh".
(3) Follow the on-screen instructions to proceed
with the setup.
After installation is complete, remove the CD-
ROM.
IE
Note
Keep the CD-ROMs in a safe place in case you
need to reinstall the software.
canon
l"siallation completed successfully.
""-----
-_._.
--
11