Canon PIXMA MP970 series Quick Start Manual page 140

11
When the Installation completed
successfully screen appears, click Restart.
Remove the CD-ROM after clicking Restart and
restarting the computer.
W
Note
Keep the CD-ROM in a safe place in case you need to
reinstall the software.
When the computer restarts, the Canon IJ Network
Tool will start up automatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restarting the computer while connected to the
machine may cause the machine not to be
detected. To resolve this, either unplug the USB
cable then plug it back in again, or turn the machine
off then back on again.
.-.::.:::=::--:-----1
I
_ . J
W
Note
When using Mac OS X v.10.2.8 to v.10.3.x, before
using the Operation Panel on the machine to save
scanned originals to the computer, it is necessary to
select MP Navigator EX as the launch application on
Image Capture under Applications. For details, refer
to "Scanning Images" in the User's Guide on-screen
manual.
12
Confirm the connection type.
The next procedure varies depending on how you
intend to connect the machine and the computer.
Sf!ttingiJp foryse over
LAN
See "2-A Setting up for use over LAN" on page 21.
S,ttingupanadditiQnall.l\N-connectedC:Oplputer
~,-
••; -.-:.>.-- "\ • --: : - - '."..
;k..--.-h " -.-
:' : :> ,..: -:. - .
See "2-B Setting up an additional LAN-connected computer"
on page 24.
To use a USB connection, refer to your setup sheet.
20