Canon PIXMA MP970 series Quick Start Manual page 152

Photo aii-in-one
Hide thumbs Also See for PIXMA MP970 series:
Table of Contents

Advertisement

Problem
I
Possible Cause and Measures
"Communication with the Card Slot
failed." is displayed during the network
setup of the Card Slot
(Continued)
"The Card Slot is already mapped as
Network Drive to this computer." is
displayed during setup
"Cannot map any more drives, because
all the drive letters are assigned." is
displayed during the network setup of
the Card Slot
If the setup is in progress, click Skip to complete the setup. Then mount the
Card Slot using the Canon IJ Network Tool.
• Change the workgroup name to "WORKGROUP" following the procedure
below.
(1) Right-click My Computer, then select Properties.
(2)Select the Computer Name tab, then click Change.
(3)Change the workgroup name to "WORKGROUP", then click OK.
If these do not resolve the problem, click Skip to complete the setup without the
network setup of the Card Slot. To mount the Card Slot as the network drive
after setup, refer to "Troubles in the Network Setup of the Card Slot" in
"Troubles When Using the Machine over Network" in "Troubleshooting" of the
User's Guide on-screen manual.
1~11I
• Make sure that a memory card is inserted in the Card Slot. If it is not inserted,
insert it.
W
Note
Depending on the Mac OS version, the authentication screen may appears.
If it appears, click OK.
If these do not resolve the problem, click Skip to complete the setup without the
network setup of the Card Slot. To mount the Card Slot as the network drive
after setup, refer to "Troubles in the Network Setup of the Card Slot" in
"Troubles When Using the Machine over Network" in "Troubleshooting" of the
User's Guide on-screen manual.
The Card Slot is already available. Click OK to close the dialog, then click Next
on the Network Setup of the Card Slot dialog box.
Click Skip to complete the setup. After software installation is complete, remove
any drive letter and try the network setup of the Card Slot again using the
Canon IJ Network Tool. For details, refer to "Using the Card Slot over a
Network" in the User's Guide on-screen manual.
QT5-1184-V01
062007FS
©CANON INC. 2007
PRINTED IN THAILAND

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents