Canon PIXMA MP970 series Quick Start Manual page 137

Setting Up the Machine and the Computer
(Macintosh)
• Since Mac®
as
9, Mac
as x
Classic environments, or Mac
as x
v.10.2.7 or earlier are not
supported, do not connect the machine to these.
• Log on as an Administrator.
• Before installing the MP Drivers, disable all anti-virus programs and automatically loading
programs or remove them from your system folder.
W
Note
The screens below refer to Mac OS X v.1 O.4.x installation. Screens may vary depending on the operation
system you are using and also depending on the country or region of purchase.
1 Installing the software
To set up an additional LAN-connected computer, you do not need to connect it to the machine with
a USB cable. Start from step 2.
1
Connect the machine and the computer with
a USB cable.
(A) USB port
W
Note
Make sure that the machine is turned on.
2
Start your Mac.
3
Insert the Setup CD-ROM.
~ Important
If two CD-ROMs are included in the package for the
Windows setup, insert the Setup CD-ROM "Windows
(CD-2) Macintosh" for the Macintosh setup.
W
Note
If the CD-ROM folder does not open automatically,
double-click the CD-ROM icon
til
on the desktop.
17