dji INSPIRE 1 Quick Start Manual
Hide thumbs Also See for INSPIRE 1:

Advertisement

INSPIRE 1
Quick Start Guide
V1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INSPIRE 1 and is the answer not in the manual?

Questions and answers

Summary of Contents for dji INSPIRE 1

  • Page 1 INSPIRE 1 Quick Start Guide V1.0...
  • Page 2 INSPIRE 1 The Inspire 1 is a professional aerial filmmaking and photography platform that is ready to fly right out of the box. Featuring an onboard camera equipped with a 20mm lens and 3-axis stabilized gimbal, it shoots sharp 12mp stills and stable video at up to 4K.
  • Page 3: Remote Controller

    Remote Controller The maximum transmission distance of the Inspire 1 remote controller is 2km*. The remote controller also allows you to control the landing gear or activate Return to Home with a tap. Other buttons allow instant photo capture, video recording, picture review and gimbal control.
  • Page 4: Calibrating The Compass

    14700 feet (4500 meters) or more above sea level as battery and aircraft performance may be reduced. 6. The Inspire 1 cannot operate in P mode or use GPS at polar latitudes. It only can fly in ATTI mode and use the Vision Position-...
  • Page 5 Appendix Aircraft (Model: T600) ● Weight (Battery Included) 2935g Maximum Weight of Payload 3400g Max Tilt Angle 35° Max Ascent Speed 5m/s Max Descent Speed 4m/s Max Speed 22m/s (ATTI mode, no wind) Max Flight Altitude 4500m Max Flight Time Approximately 18 minutes Operating Temperature Range -10°...
  • Page 6: Download The Dji Pilot App

    Using INSPIRE 1 Watch the video tutorials on the official DJI website and read the following documents before using your Inspire 1 for the first time: Inspire 1 Quick Start Guide, Disclaimer, Intelligent Flight Battery Safety Guidelines, Inspire 1 Safety Guidelines, In the Box, Inspire 1 User Manual.
  • Page 7: Preparing The Remote Controller

    If you have purchased an Inspire 1 with dual remote controllers, the Master remote controller will connect to the aircraft automatically when powered on. Master/Slave mode is disabled by default. Activate it and set it up through the DJI Pilot app.
  • Page 8: Preparing For Flight

    Ensure the remote controller is linked to the aircraft before flight. Re-link the remote controller to the aircraft if it fails to connect. Refer to the INSPIRE 1 User Manual on how to link. Ensure the remote controller and your mobile device are connected with a USB cable.
  • Page 9: Remote Controller Status Led

    Auto Taking - Off & Landing: ● Safe to Fly (GPS) ( In the Camera screen of the DJI Pilot app ) Before taking off, make sure the aircraft and confirm your selection. The aircraft will automatically take off, retract status bar in the DJI Pilot app shows “Safe...
  • Page 10 INSPIRE 1 Creativity Unleashed www.dji.com...

Table of Contents