Procedure - Gemalto MagIC3 C-series Maintenance Manual

E-Payment
1.4

Procedure

The troubleshooting operation must always follow the general
procedure below :
Make sure the software configuration is coherent and
operational.
You are
ELASTOMERIC by reading MI 14.
If you repair Terminal equipped with FLEX_KEYPAD,
you are aware of information related to it by reading
MI 15.
Before opening the Terminal, make sure that all
cables are disconnected. The Terminal must be off
before opening it.
If you open the Terminal during repair operation, Get
into the habit of checking the LITHIUM_BAT voltage.
We recommend to change the LITHIUM_BAT if Vbat
< 2,9V (or if it is 3 years old).
Always start analyse by checking the POWER
SUPPLY first (§ 2.1).
Ref: 22000-01-MAN-I-09010
Copyright Gemalto – 2009
3
MagIC C-series - MAINTENANCE MANUAL
Chapter 2 : TROUBLESHOOTING
aware of
Sept 2009
No disclosure to a third party without prior written consent of Gemalto
information related to
Ch.2 - 17/32