Trip Computer - Trip Statistics - Volvo S60 Owner's Manual

Trip computer – Trip statistics
Trip information from previous trips regarding
average fuel consumption and average speed is
stored and can be displayed in the form of a bar
chart.
Function
27
Trip statistics
Each bar represents a driving distance of 1 mile
or 10 miles, depending on the current scale; the
bar at the far right shows the value for the cur-
rent mile/10 miles.
Use TUNE to change between 1 mile and
10 miles; the marker at the right will also change
according to the scale selected.
The illustration is generic; certain details may vary from model to model
27
Settings
Settings can be made in the MY CAR menu sys-
tem as follows:
MY CAR My S60 Trip statistics:
•
Start new trip : press ENTER to erase all
pervious statistics. Exit the menu by pressing
EXIT.
•
Reset for every driving cycle
pressing ENTER. Exit the menu by pressing
EXIT.
Reset for every driving cycle
Selecting
all trip statistics automatically if the ignition is
switched off for at least 4 hours. When the
engine is restarted, new statistics will be stored.
To get new statistics if the engine is restarted
before 4 hours have elapsed, the existing ones
have to be erased manually by selecting
new trip
.
For additional information, see Information display
– menu controls (p. 108).
See also the information about Eco Guide in Eco
Guide* and Power Meter* (p. 66).
Related information
•
Trip computer – introduction (p. 110)
•
Trip computer – functions, analog instrument
panel (p. 111)
•
Trip computer – functions, digital instrument
panel (p. 114)
•
Trip computer – Supplementary information
(p. 116)
: select by
erases
Start
* Option/accessory, for more information, see Introduction.
INSTRUMENTS AND CONTROLS
117