Connecting An A/V Receiver - Audio Only - Motorola DCT6400 Phase III User Manual

Connecting an A/V Receiver – Audio Only
The audio connections options to your A/V receiver or home theater
receiver are:
•
Optical SPDIF: Connect the optical SPDIF cable to the
connector on the DCT6400 and the corresponding connector
SPDIF
on the A/V receiver.
•
Coaxial SPDIF: Connect the digital audio cable to the
connector on the DCT6400 and the corresponding connector on
the A/V receiver.
•
Stereo audio
and
AUDIO R
connectors on the A/V receiver.
If you're A/V receiver supports it, use the
outputs on the DCT6400 instead of its stereo
most cases, S/PDIF offers better audio quality, including support for
Dolby 5.1 Surround Sound.
For information on configuring your DCT6400 settings, see "Optimizing
Your DCT6400 for High Definition TV."
and : Connect the stereo audio cable to the
R L
connectors on the DCT6400 and the corresponding
L
DCT6400 Phase III User Guide
OPTICAL SPDIF
AUDIO R
21
OPTICAL
SPDIF
or coaxial
SPDIF
and L outputs. In