Software Settings; Configuration File Lead-In - WINBO WB20141117 User Manual

User Manual for WINBO 3D Printers
Put in machine specifications
and Finish
Build size:
DARGON：305 x 205 x 500 mm
PRACTICAL：305 x 205 x 300 mm
VALUE：245 x 205 x 200 mm
MINI：210 x 150 x 150 mm
Here comes the interface for the software:
If the machine has not been connected with the computer, you may skip the First time run wizard. When
running the software, you may enter the First time run wizard by coming to the "Expert" → "ReRun first run
wizard" under the menu.
C.1 CONFIGURATION FILE LEAD-IN
You may finish the software settings by leading in the configuration file in the SD card. Click on "File" and
choose "Open Profile". Find out the "WINBO-3D Printer.ini" and click on it.
C. SOFTWARE SETTINGS
Choose Option and Next
4
Version: WB20141117