Machine Maintenance - WINBO WB20141117 User Manual

User Manual for WINBO 3D Printers
WINBO 3D printers can work for dozens of hours continually. After long time working, some parts on the
machine may go through wear and tear. We kindly advice that you should apply maintenance to the machine
every month.
1) Machine casing. Clean the machine casing with soft cloth, to remove the dust and plastic fragment.
2) Axis. When you find that there is unpleasant noise or intense vibration on the axis, it is time to lubricate
them. Apply some lube on the axis with a cloth.
3) Extruder. To clean the extruder, you need an Allen wrench of 0.2mm diameter and a pair of tweezers.
Allen wrench
Steps:
1
Go to the LCD panel "prepare" 
"preheat PLA" or "Preheat ABS" to
heat up the extruder to 230℃
4
Put an Allen wrench inside the extruder to
pull out the plastic residue
H. MACHINE MAINTENANCE
Tweezers
Pull out the blue buckle
Turn around the Allen wrench so
that the residue can attach to it
2
5
23
Version: WB20141117
3
Pin on the lock catch and pull
out the transparent tube
6
Pull out the Allen wrench
very quickly