User Manual for WINBO 3D Printers
There are many functions to make adjustment to the model, such as flipping, rotating, scaling and so on.
F.1.1 ROTATE
Click
and you can rotate the model from X, Y or Z axis. The red one is X-axis, green Y-axis and yellow
Z-axis.
Reset
: reset the model that has been rotated.
Lay flat
: lay down the model that has been rotated.
F.1.2 SCALE
Click on
to adjust the size of the model. You may make adjustment by dragging the mouse on the
three points or inputting exact value as below:
15
Version: WB20141117