Basic Functions; D.2 B Asic F Unctions - WINBO WB20141117 User Manual

User Manual for WINBO 3D Printers
1
Put the spool holder
4
Put on the glass plate
7
Put back the blue buckle
D.2 Basic Functions
There is a control knob on the right of the LCD panel and the functions are as below:
You may press the knob for confirmation
Rotate it counter-clockwise: you are reading the next menu
Rotate it clockwise: you are reading the last menu
With power on, the LCD panel shows as below:
2
Load the filaments spool
5
Pull out he blue buckle on the
feeder mechanism
8
Version: WB20141117
3
Connect the cable
6
Insert the other end of the
transparent tube