Introduction; Overview; Heater Components - Brant Radiant Heaters DX2-20-60 User Manual

DX2 Series
1.0

Introduction

Overview

The intent of this manual is to provide information regarding general safety, installation, operation and maintenance
of the tube heater. You must read, and understand, the instructions and safety warnings in this manual before
installing the tube heater. Additional literature on this and other products is available
at www.brantradiant.com.

Heater Components

Prior to installation, verify that the heater's gas type and voltage (as listed on the rating plate) match that of your
application. Also verify that you have received all heater contents included with your tube heater. Reference page
52 for a list of the kit contents for your model heater. Materials not included in the heater kit contents (e.g., screws,
vent material, terminals, etc.) are the responsibility of the installer. Notify your product representative or Brant
Radiant Heaters Ltd. of any discrepancy or missing kit contents prior to installing unit.
Figure 1.1 • Heater Components *
Reflector Center Support
Tube Hanger
Reflector End Cap with Clips*
Burner Control Box
16" Burner Tube
Flexible Type 1 Rubber Hose*
Chains are not provided in kit.
Optional accessory. P/N: THCS
Reflector
Tension
Spring*
Tube Clamp
Igniter/Sensor Box
1.0 Introduction
* Not all items illustrated may be provided with your heater.
Refer to kit contents on page 52 of the Series Manual.
3
• •
Overview Heater Components
Tube Hanger
10' Primary/
Secondary
Combustion
Chamber(s)
Reflector
Baffles
Radiant
Tube(s)