Kenwood KS 100 G Instructions For Use - Installation Advice page 33

Grill Burner
Unscrew and remove the burner securing screw "A" (fig. 6.8).
−
Withdraw the burner as shown in figure 6.9. Take care not to damage the safety valve
−
probe and the electric ignition electrode.
Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in fig. 6.9)
−
and replace it with a new one selected in accordance with the "Table for the choice of
the injectors".
Regulate the air supply to the grill burner as indicated in the section "Regulation of air
−
supply to oven and grill burners"; then replace the burner repeating the above steps
in reverse order.
IMPORTANT: Check the correct operation of the safety valve and the ignition


electrode.
Fig. 6.8
Fig. 6.9
A
33