Table of Contents
Advertisement
Installation Guide
Before you can install the product, you need to prepare your site:
1.
Determine where the computer is to be located and set up the computer.
2.
Determine where you want to locate the remote desktop including the monitor, keyboard, mouse
and any other USB device(s).
3.
If you are using surface cabling, the product supports a maximum distance of 100m.
OR
If you are using premise cabling, ensure Cat 5 cabling is installed between the two locations,with
Cat 5 information outlets located near both the computer and the USB device(s), and the total length,
including patch cords is no more than 100m.
Installing the Local Extender Unit
1.
Place the Local Extender unit near the computer.
2.
Install the supplied USB cable to Local Extender (Type B Port), and an available USB 2.0/1.1 Type A Port
on the computer.
3.
Install the supplied DVI cable to the Local Extender (DVI-D In), and an available DVI Port on the
computer.
Installing the Remote Extender Unit
1.
Place the Remote Extender unit near the monitor and USB device(s) in the desired remote location.
2.
Connect the Remote Extender DVI-D Out to the monitor with a DVI cable.
3.
Plug in your USB Device(s).
Up to 330ft
(100m) over Cat 5
8
Advertisement
Table of Contents
