Table of Contents
Advertisement
Installation Guide
Example Application
Computer & Monitor
Requirements
To complete installation of the Spectra 3022, you will also require the following items that are not included
with the product:
•
USB 3.0 compatible computer (host computer) with a USB 3.0 compliant operating system
•
USB 3.0 compatible device
•
2-strand 50/125μm multimode (MMF) iber optic cable with Duplex LC connectors
Fiber Optic Link Cabling
The LEX and REX are interconnected by iber optic cabling. This cabling must be:
•
50/125μm multimode fiber (MMF)
•
Terminated with Duplex LC connectors
The following maximum distances are achievable depending upon the application and cabling standard:
Multimode
Cameras
Fiber Class
OM2
50m
OM3
100m
For assistance sourcing appropriate f iber optic cabling, contact
note
If premise cabling will be used for the installation, then the distances provided above must be met when
measuring from LEX to REX, inclusive of the premise cabling and the patch cables. All cables must meet the
ratings speciied. Patch cables must be terminated with Duplex LC connectors.
USB 3.0 up to 100m
over multimode f iber
LEX
Storage
Up to 50m with USB 3.0 storage type devices and up to 100m is achievable when using USB 3.0 bulk
50m
traf ic cameras.
50m
USB 3.0 Cameras
REX
For Microsoft Kinect applications, please use the SP3001-15 active extension cable.
Icron Technical
6
Assembly Line
Support.
Advertisement
Table of Contents
