Advertisement

FOR MODELS:

OPERATING INSTRUCTIONS

MIG125
IMPORTANT OPERATING INSTRUCTIONS
SAVE THESE INSTRUCTIONS
3.300.909

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIG125 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Snap-On MIG125

  • Page 1: Operating Instructions

    FOR MODELS: OPERATING INSTRUCTIONS MIG125 IMPORTANT OPERATING INSTRUCTIONS SAVE THESE INSTRUCTIONS 3.300.909...
  • Page 2 DANGER Electric welding or plasma cutting cause ultraviolet rays and weld spatter. Bystanders will be exposed to ultraviolet rays and weld spatter. Wear welding helmet with appropriate shade lens while using electric welders or plasma cutters. Do not allow bystanders while welding or cutting. Wear safety shield and protective clothing (user and bystanders).
  • Page 3: Installation

    INSTRUCTION MANUAL FOR WIRE WELDING MACHINES A) Switch WARNING! Turns the machine on and off. READ, UNDERSTAND AND FOLLOW THIS MAN- B) Adjustment switches UAL CAREFULLY BEFORE INSTALLING, USING, By means of these switches one adjusts the welding OR SERVICING THE WELDING MACHINE, PAYING SPE- voltage.
  • Page 4: Connecting The Gas Hose

    20-25 CFH. WARNING! CAUTION: Make sure the gas used is compatible with the The MIG125 must be installed by qualified person- material to be welded. nel. All connections must be made in full compli- ance with all applicable rules and regulations.
  • Page 5: Troubleshooting Guide

    When replacing the wire roller, make sure the groove is aligned with the wire and corresponds to the diameter of the wire used. Always keep the interior of the gas nozzle clean to avoid metal bridges created by welding dross between the gas nozzle and the contact tip.
  • Page 6 Allow the welded material to cool down before IMPORTANT: DO NOT USE OXYGEN FOR VENTILATION. touching it or putting it in contact with combusti Gas leaks in a confined space should be avoided. ble or flammable material. Leaked gas in large quantities can change oxygen con- Do not weld parts with hollow spaces, containing flam- centration dangerously.
  • Page 7: Electric Shock

    7.5 RADIATIONS 7.7 PACE MAKER WARNING! WARNING! Ultra-violet radiation created by the arc may Magnetic fields from high currents can affect pace- damage your eyes and burn your skin. Therefore: maker operation. Persons wearing electronic life support equipment (pacemaker) should consult their doctor befo- Wear proper clothing and helmet.
  • Page 8 Part # Ref. Model Description MIG125 CKS246948 CLOSING 5801616 PANEL SIDE 3165110 WIRE FEED MOTOR CKS248427 COIL SUPPORT COMPLETE CKS251030 RING CKS251031 SPRING CKS251027 COIL SUPPORT SPACER CKS251022 COIL SUPPORT CKS251067 TERMINAL BOARD 5802830 CENTER DEVIDER 3120065 HINGE 3055203 HANDLE...
  • Page 9 MODEL MIG125...

Table of Contents

Save PDF