General Information; Model Identification - Club Car 2009 XRT 950 4x2 Owner's Manual

1403
Figure 4 Dispose of Lead-acid Batteries Properly

GENERAL INFORMATION

This manual includes operating procedures, maintenance, and regular servicing information for all XRT 950 4x2,
950 4x4, and 950 EX 4x4 vehicles. All operating procedures, maintenance, and regular servicing are identical
unless otherwise noted.

MODEL IDENTIFICATION

The serial number of each vehicle is printed on a decal mounted either below the passenger side cup holder or above
the accelerator or brake pedal (Figure 5). See following NOTE.
NOTE: Have the vehicle serial number available when ordering parts or making inquiries.
A 17-digit Product Information Number (PIN) is included on this vehicle below the passenger-side dash
(Figure 6). This number may be used to register the vehicle where required.
Build Code: The build code is a five-digit number that appears on the manufacturer's vehicle serial number decal
(Figure 5). The build code exists to enable the user to identify the correct operator's manual for a vehicle. This
operator's manual is valid for the build code range indicated on the back cover of this operator's manual.
IDENTIFICATION NUMBERS
Write your vehicle model number, model serial number and engine serial number on the lines provided below. If
needed, give these numbers to your dealer when you need parts or information for your vehicle. Make a record of
the numbers. Keep the record and your Manufacturer's Statement of Origin in a safe place. If the vehicle is stolen,
report the numbers to your local law enforcement agency.
2009-2011 XRT 950 Gasoline Vehicle Owner's Manual
General Information
Page 13