Rear Shock Absorbers; Loading And Unloading Cargo - Club Car 2009 XRT 950 4x2 Owner's Manual

Rear Shock Absorbers

1
1. Locking Pin 2. Bed Locking Pin Holes
k-00221
Figure 14 Bed Locking Pin
REAR SHOCK ABSORBERS
The vehicle arrives from the factory with the rear coil-over shocks pre-adjusted for optimum vehicle performance.
CAUTION
• Do not adjust the rear shock absorbers. Damage to the shock absorbers could result.

LOADING AND UNLOADING CARGO

WARNING
• Engage park brake before loading vehicle.
• Do not allow riders in the cargo bed.
• Reduce vehicle load and speed when driving up or down slopes or on uneven terrain.
• Reduce speed and avoid sudden stops when backing up. Failure to do so may cause the vehicle
to overturn or flip over backwards.
• Do not exceed rated vehicle capacity. Rated capacity is for level surfaces only.
• Overloading can affect vehicle handling or cause component failure, resulting in loss of control of
vehicle and possible severe personal injury or death.
• Do not load tailgate. The tailgate should be in the upright position and latched securely while the
vehicle is in motion.
• To help avoid shifting vehicle load and possibly overturning the vehicle, avoid sudden starts, sudden
stops and abrupt turns. Make sure cargo is well secured.
WARNING CONTINUED ON NEXT PAGE
Page 28 2009-2011 XRT 950 Gasoline Vehicle Owner's Manual
2