Black & Decker Performance FusionBlade BL6010 Use & Care Manual page 6

Important: Do not remove the lid while the
blender is running.
8. When finished press ON/OFF or PULSE/STOP
to stop blending (E). Make sure blades have
completely stopped before attempting to
remove the blending jar from the base. (Refer
to troubleshooting for any issues).
9. Press ON|OFF to power off. Unit will auto shutoff
after 60 seconds without use.
10. To remove the jar, grasp the handle and lift up.
11. Remove lid to pour.
12. Always unplug the appliance when not in use.
US IN G THE P ER S O N A L BL EN D E R JAR
(NOT INCLUDED WITH ALL MODELS)
Note: Do not blend hot liquids in the personal jar.
1. Place the personal blender jar on a flat surface with the open end facing up.
Fill the jar with ingredients. Do not fill ingredients past the "20oz." marking.
Note: For best results, add ingredients in the following order:
a. Liquids
b. Ice
c. Hard Foods
d. Soft Foods
e. Powders
2. Tighten the personal jar blade assembly on the open end of the personal
jar with the blade facing down towards the ingredients. It is important to
tighten to prevent leaking during blending.
3. Turn personal jar upside down and place on the blender base, turning
clockwise to lock into place.
4. Select the appropriate speed or use PULSE to blend to desired consistency.
IMPORTANT: It is recommended to only use speeds 1-3 or AUTO 3 when using the
personal jar.
6