Block Devices; Security Tips; Data Cable - Nokia N86 8MP User Manual

To delete a pairing, select the device whose pairing you
want to delete and Options
pairings, select Options
connected to a device and cancel the pairing with that
device, pairing is removed immediately, and the
connection is ended.
To allow a paired device to connect automatically to your
device, select Set as authorised. Connections between
your device and the other device can be made without
your knowledge. No separate acceptance or
authorisation is needed. Use this status only for your own
devices, such as your compatible headset or computer, or
devices that belong to someone you trust. If you want to
accept connection requests from the other device
separately every time, select
To use a Bluetooth audio accessory such as a Bluetooth
handsfree or headset, you need to pair your device with
the accessory. For the passcode and further instructions,
see the accessory user guide. To connect to the audio
accessory, switch on the accessory. Some audio
accessories connect automatically to your device.
Otherwise, open the paired devices tab, select the
accessory and Options

Block devices

Select Menu Settings
>
Bluetooth.
© 2009 Nokia. All rights reserved.
> Delete. To delete all
Delete all. If you are currently
>
Set as unauthorised.
Connect to audio device.
>
Connectivity
> >
To block a device from establishing a Bluetooth
connection to your device, open the paired devices tab.
Select a device you want to block and
To unblock a device, open the blocked devices tab, and
select Options > Delete. To unblock all blocked devices,
select Options Delete
>
If you reject a pairing request from another device, you
are asked if you want to block all future connection
requests from this device. If you accept the query, the
remote device is added to the list of blocked devices.

Security tips

When you are not using Bluetooth connectivity, select
Bluetooth Off or My phone's visibility
>
Do not pair with an unknown device.

Data cable

To avoid corrupting data, do not disconnect the USB data
cable during data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect the
device to a compatible PC with the data cable.
Options > Block.
all.
> Hidden.
57