Modify The Standby Mode - Nokia N86 8MP User Manual

To change the 3-D effect that is applied to the ringing
tone, select Sound trajectory
To modify the effect, select from the following settings:
Trajectory speed — Scroll left or right to adjust the
●
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
Reverberation — Select the type of echo.
●
Doppler effect — Select
●
sound higher when you are closer to your device, and
lower when you are farther away. When you get closer
to the device, the ringing tone seems to become
higher, and lower when you move away from it. This
setting is not available for all ringing tones.
To listen to the ringing tone with the 3-D effect, select
Options Play tone. If you enable the 3-D tones but do
>
not select any 3-D effect, stereo widening is applied to the
ringing tone.
To adjust the ringing tone volume, select
Profiles Options
> >
volume.

Modify the standby mode

To change the look of the standby mode, select
Tools Settings and
>
© 2009 Nokia. All rights reserved.
and the desired effect.
On to have the ringing tone
Tools
Personalise Ringing
>
General Personalisation
>
Standby mode. The active standby display shows
application shortcuts, and
events from applications such as
calendar, e-mail, and music
player.
To change the selection key
shortcuts or the default shortcut
icons in the active standby
mode, select
Settings
>
Personalisation
mode > Shortcuts.
To change the clock shown in the
standby mode, select
Options
>
You can also change the standby mode background image
or what is shown in the power saver in the device settings.
Tip: To check whether there are applications
running in the background, press and hold the
>
menu key.To close the applications you do not use,
scroll to an application in the list, and press C.
Leaving applications running in the background
increases the demand on battery power.
Menu
>
>
Tools
>
General
>
Standby
>
Menu Applications
>
Settings Clock type.
>
Clock and
>
135