Block Devices; Remote Sim Mode; Usb - Nokia N78 User Manual

Block devices

Press , and select
To block a device from establishing a Bluetooth
connection to your device, scroll right to open
Paired devices. Select a device you want to block
and Options > Block.
To unblock a device, scroll right to
devices, select a device, and
unblock all blocked devices, select
Delete all.
If you reject a pairing request from another device,
you are asked if you want to block all future
connection requests from this device. If you accept
the query, the remote device is added to the list of
blocked devices.

Remote SIM mode

Before the remote SIM mode can be activated, the
two devices must be paired and the pairing initiated
from the other device. When pairing, use a 16-digit
passcode, and set the other device as authorised.
To use the remote SIM mode with a compatible car
kit enhancement, activate Bluetooth connectivity,
and enable the use of the remote SIM mode with
your device. Activate the remote SIM mode from the
other device.
94
Tools > Bluetooth.
Blocked
Options > Delete. To
Options
>
When the remote SIM mode is on in your device,
Remote SIM mode is displayed in the standby
mode. The connection to the wireless network is
turned off, as indicated by
indicator area, and you cannot use SIM card services
or features requiring cellular network coverage.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive
calls. Your wireless device will not make any calls
while in this mode, except to the emergency
numbers programmed into your device. To make
calls from your device, you must leave the remote
SIM mode. If the device is locked, enter the lock code
to unlock it.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM

USB

Press , and select Tools
USB.
To have the device ask the purpose of the
connection each time a compatible data cable is
connected, select Ask on connection
If Ask on connection is set to off or you want to
change the mode during an active connection,
in the signal strength
mode.
Connectivity
> >
> Yes.