Nokia N86 8MP User Manual page 165

You may receive these settings from your service provider
in a configuration message. If not, define the following:
Server name — Enter a name for the configuration
●
server.
Server ID — Enter the unique ID to identify the
●
configuration server.
Server password — Enter a password to identify your
●
device to the server.
Access point — Select the access point to use for the
●
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you
have selected Internet
Host address — Enter the web address of the
●
configuration server.
Port — Enter the port number of the server.
●
User name and Password
●
password for the configuration server.
Allow configuration
●
to initiate a configuration session.
Auto-accept all requests
●
want the server to ask for your confirmation when it
initiates a configuration session.
Network authentication
●
http authentication.
Network user name
●
password — Enter your user ID and password for the
© 2009 Nokia. All rights reserved.
as the bearer type.
— Enter your user ID and
— Select Yes to allow the server
— Select Yes if you do not
— Select whether to use
and Network
http authentication. This setting is available only if you
have selected Network authentication
To connect to the server and receive configuration
settings for your device, select
configuration.
To view the configuration log of the selected profile,
select Options View
>
To update the device software over the air, select
Options Check for updates. The update does not
>
erase your settings. When you receive the update package
on your device, follow the instructions on the display.
Your device is restarted once the installation is complete.
Downloading software updates may involve the
transmission of large amounts of data (network service).
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
restarted. Be sure to back up data before accepting
installation of an update.
to be used.
Options Start
>
log.
163