Network Settings; Connection Settings; Data Connections And Access Points - Nokia N86 8MP User Manual

option is active (Check
calls, including data calls.
Internet call barring
To select whether anonymous calls are allowed from the
internet, set Anonymous call barring

Network settings

Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Select Menu Tools
>
Network and from the following:
Network mode — Select which network to use. If you
●
select Dual mode, the device uses the GSM or UMTS
network automatically, according to the network
parameters and the roaming agreements between the
wireless service providers. For details and roaming
costs, contact your network service provider. This
option is shown only if supported by the wireless
service provider.
A roaming agreement is an agreement between two
or more service providers to enable the users of one
service provider to use the services of other service
providers.
© 2009 Nokia. All rights reserved.
status). Call barring affects all
on or off.
Settings and Phone
>
Operator selection
●
device to search for and select one of the available
networks, or
from a list. If the connection to the manually selected
network is lost, the device sounds an error tone and
asks you to reselect a network. The selected network
must have a roaming agreement with your home
cellular network.
Cell info display
●
is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
>

Connection settings

In connection settings, you can edit access points and
other connectivity settings.

Data connections and access points

Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access
points can share a data connection. In the UMTS network,
data connections remain active during voice calls.
You can also use a WLAN data connection. Only one
connection in one wireless LAN can be active at a time,
— Select Automatic
Manual to manually select the network
— Set the device to indicate when it
to set the
157