Receive Data Using Bluetooth Connectivity; Block Devices; Remote Sim Mode - Nokia N78 User Manual

Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated by
.

Block devices

Press , and select Tools
To block a device from establishing a Bluetooth
connection to your device, scroll right to open
devices. Select a device you want to block and
Block.
To unblock a device, scroll right to
select a device, and Options
blocked devices, select
If you reject a pairing request from another device, you
are asked if you want to block all future connection
requests from this device. If you accept the query, the
remote device is added to the list of blocked devices.
© 2008 Nokia. All rights reserved.
is displayed, and the item is
> Bluetooth.
Blocked devices,
> Delete. To unblock all
Options Delete all.
>

Remote SIM mode

Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from the
other device. When pairing, use a 16-digit passcode, and
set the other device as authorised.
To use the remote SIM mode with a compatible car kit
enhancement, activate Bluetooth connectivity, and
enable the use of the remote SIM mode with your device.
Activate the remote SIM mode from the other device.
When the remote SIM mode is on in your device,
SIM mode
connection to the wireless network is turned off, as
indicated by
Paired
you cannot use SIM card services or features requiring
Options
>
cellular network coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls while in this mode, except to the
emergency numbers programmed into your device. To
make calls from your device, you must leave the remote
SIM mode. If the device is locked, enter the lock code to
unlock it.
To leave the remote SIM mode, press the power key, and
select Exit remote SIM
is displayed in the standby mode. The
in the signal strength indicator area, and
mode.
Remote
103