Installing And Removing Sim Cards In An Mtd-H5; Installing A Sim Card - Multitech MTD-H5 User Manual

Installing and Removing SIM Cards in an MTD-H5

Installing a SIM Card

Only MTD-H5 models have a SIM card.
Warning: If the device is connected to a computer or power supply, disconnect it. Inserting or removing a SIM
card with the device powered may harm the SIM card and the device.
1. Remove the SIM cover from the back of the device. If you have trouble sliding the SIM cover, use a flat-blade
screwdriver in the slot on the SIM cover to slide it out.
2. Insert the SIM card into the card holder with the gold contact side facing down as shown.
3. Verify that the SIM card fits into the holder properly and replace the cover.
5 QuickCarrier USB-D MTD-H5 and MTD-EV3