Multitech MTD-H5 User Manual page 13

Network Initiated (NI) or Client Initiated (CI) Firmware Update Management Object (FUMO)
Notifications
FUMO - Firmware DM session started or started again until no more updates
#907
are available
#911 FUMO - credential error
#912 FUMO - unreachable server
#913 FUMO - network error
#915 FUMO – update fails with other reasons
#916 FUMO - Firmware done, no firmware update
#919 FUMO - Firmware downloaded successfully
#920 FUMO - Firmware download progress (percent)
#921 FUMO - Firmware download start
#921 FUMO - Firmware size get from the OMA-DM server (byte)
#929: 200 FUMO - Firmware Update Success
#929: 402 FUMO - Firmware corrupted , CRC error
#929: 403 FUMO - Firmware package mismatch
#929: 404 FUMO - Firmware signature failed
#929: 406 FUMO - Firmware update authentication failed
FUMO - Firmware update General Error #930 FUMO - Firmware Reporting
#929: 410
Firmware Update result to server
#DREL Data session release
Additional Network Initiated Alert Indications (NIA Retry)
#926 NIA - NIA retry start
#927 NIA - Notification done with no NIFA information
#928 NIA - NIA digest mismatch error
OMA-DM Commands
These commands are available after the unsolicited indication #900 appears, which means DM client is ready.
AT#OMADMSVADDR=<URL>
AT#OMADMSVADDR?
AT#OMADMSVPORT=<port#>
AT#OMADMSVPORT?
AT#OMADMPROXY=<port#>,<URL>
AT#OMADLPROXY=<port#>,<URL>
13
Set OMA-DM server address (default
https://oma.ssprov.sprint.com/oma)
Read OMA-DM server address
Set OMA-DM server (default 443)
Read OMA-DM server
Set OMA-DM proxy server port/URL (default
http://oma.ssprov.sprint.com:80)
Set OMA-DL Proxy DL Server Port URL (default
http://oma.ssprov.sprint.com:80)
QuickCarrier USB-D MTD-H5 and MTD-EV3